5" Wet Diamond Polishing Pads
5 inch diamond polishing pads are abrasives used for concrete stone granite sanding honing grinding and polishing. They also known as diamond sanding pads discs and are used for Concrete polishing sanding, Granite polishing sanding, Marble, Granite Tile, Marble Tile, Travertine, Terrazzo, Ceramic Tile, Porcelain tile, artificial and natural stones polishing sanding. 5 inch polishing pads are very common size pads in use. 5 Inch Wet diamond polishing pads are used widely for being appropriate for either large small flat area or edges with minor curves. The area it can polish per rotation is approximately 2.8 times more than 3 inch polishing pads, it is a huge advantage to polish bigger area much faster and results in a consistent finish. 5 inch polishing pads are available in various thickness starting 2 MM typically till 5 MM, available in various degree of flexibility. Generally most of the thicker pads are rigid with very limited or no flexibility. These wet diamond polishing pad can be used effectively on straight edges and contoured. 5 Inch wet diamond polishing pads are available in various grit, the most commons grits are 30, 50, 100, 200, 400, 800, 1500, 3000, 6000, 10000 and Buff. Each grit is color codes with an specific color for the Velcro backing, that makes it easy to identify. The 5 inch diamond polishing pads disc provides the most expected job done and usually provides better finish in comparison to dry polishing. Projects where water usage is not possible, dry polishing is preferred using 5inch dry diamond polishing pads. The Velcro backing of 5 inch diamond grinding discs ensure quick and easy change of polishing pads. These wet diamond polishing pads set kit works works optimally at 2200 RPM with maximum RPM rating 4500. This 5 inch diamond polishing pads disc make polishing process dust free and attain quickly most expected result, and are used with adequate water. The stones should be fixed accurately on which the wet diamond polishing pads set kit is being used and if necessary should move carefully while working on the stones. It is highly recommended to ensure that the pads are used with the rated speed, not above the rated speed for safe operation to tool.